Variable Names Plan¶

Too Long; Didn’t Read
Introduction
Variable Names Coding Standard Options
- Differentiating variable kinds
Reducing the number of acronyms
Transition Options
Provisional Plan
References

This plan is provisional. It is not agreed upon. It is written with the intention of capturing the desires and concerns of the LLVM community, and forming them into a plan that can be agreed upon. The original author is somewhat naïve in the ways of LLVM so there will inevitably be some details that are flawed. You can help - you can edit this page (preferably with a Phabricator review for larger changes) or reply to the Request For Comments thread.

Too Long; Didn’t Read ¶

Improve the readability of LLVM code.

Introduction ¶

The current variable naming rule states:

Variable names should be nouns (as they represent state). The name should be camel case, and start with an upper case letter (e.g. Leader or Boats).

This rule is the same as that for type names. This is a problem because the type name cannot be reused for a variable name [*]. LLVM developers tend to work around this by either prepending The to the type name:

Triple TheTriple;

… or more commonly use an acronym, despite the coding standard stating “Avoid abbreviations unless they are well known”:

Triple T;

The proliferation of acronyms leads to hard-to-read code such as this:

InnerLoopVectorizer LB(L, PSE, LI, DT, TLI, TTI, AC, ORE, VF.Width, IC,
                       &LVL, &CM);

Many other coding guidelines [LLDB] [Google] [WebKit] [Qt] [Rust] [Swift] [Python] require that variable names begin with a lower case letter in contrast to class names which begin with a capital letter. This convention means that the most readable variable name also requires the least thought:

Triple triple;

There is some agreement that the current rule is broken [LattnerAgree] [ArsenaultAgree] [RobinsonAgree] and that acronyms are an obstacle to reading new code [MalyutinDistinguish] [CarruthAcronym] [PicusAcronym]. There are some opposing views [ParzyszekAcronym2] [RicciAcronyms].

This work-in-progress proposal is to change the coding standard for variable names to require that they start with a lower case letter.

[*]	In some cases the type name is reused as a variable name, but this shadows the type name and confuses many debuggers [DenisovCamelBack].

Variable Names Coding Standard Options ¶

There are two main options for variable names that begin with a lower case letter: camelBack and lower_case. (These are also known by other names but here we use the terminology from clang-tidy).

camelBack is consistent with [WebKit], [Qt] and [Swift] while lower_case is consistent with [LLDB], [Google], [Rust] and [Python].

camelBack is already used for function names, which may be considered an advantage [LattnerFunction] or a disadvantage [CarruthFunction].

Approval for camelBack was expressed by [DenisovCamelBack] [LattnerFunction] [IvanovicDistinguish]. Opposition to camelBack was expressed by [CarruthCamelBack] [TurnerCamelBack]. Approval for lower_case was expressed by [CarruthLower] [CarruthCamelBack] [TurnerLLDB]. Opposition to lower_case was expressed by [LattnerLower].

Differentiating variable kinds ¶

An additional requested change is to distinguish between different kinds of variables [RobinsonDistinguish] [RobinsonDistinguish2] [JonesDistinguish] [IvanovicDistinguish] [CarruthDistinguish] [MalyutinDistinguish].

Others oppose this idea [HähnleDistinguish] [GreeneDistinguish] [HendersonPrefix].

A possibility is for member variables to be prefixed with m_ and for global variables to be prefixed with g_ to distinguish them from local variables. This is consistent with [LLDB]. The m_ prefix is consistent with [WebKit].

A variation is for member variables to be prefixed with m [IvanovicDistinguish] [BeylsDistinguish]. This is consistent with [Mozilla].

Another option is for member variables to be suffixed with _ which is consistent with [Google] and similar to [Python]. Opposed by [ParzyszekDistinguish].

Reducing the number of acronyms ¶

While switching coding standard will make it easier to use non-acronym names for new code, it doesn’t improve the existing large body of code that uses acronyms extensively to the detriment of its readability. Further, it is natural and generally encouraged that new code be written in the style of the surrounding code. Therefore it is likely that much newly written code will also use acronyms despite what the coding standard says, much as it is today.

As well as changing the case of variable names, they could also be expanded to their non-acronym form e.g. Triple T → Triple triple.

There is support for expanding many acronyms [CarruthAcronym] [PicusAcronym] but there is a preference that expanding acronyms be deferred [ParzyszekAcronym] [CarruthAcronym].

The consensus within the community seems to be that at least some acronyms are valuable [ParzyszekAcronym] [LattnerAcronym]. The most commonly cited acronym is TLI however that is used to refer to both TargetLowering and TargetLibraryInfo [GreeneDistinguish].

The following is a list of acronyms considered sufficiently useful that the benefit of using them outweighs the cost of learning them. Acronyms that are either not on the list or are used to refer to a different type should be expanded.

Class name	Variable name
DeterministicFiniteAutomaton	dfa
DominatorTree	dt
LoopInfo	li
MachineFunction	mf
MachineInstr	mi
MachineRegisterInfo	mri
ScalarEvolution	se
TargetInstrInfo	tii
TargetLibraryInfo	tli
TargetRegisterInfo	tri

In some cases renaming acronyms to the full type name will result in overly verbose code. Unlike most classes, a variable’s scope is limited and therefore some of its purpose can implied from that scope, meaning that fewer words are necessary to give it a clear name. For example, in an optization pass the reader can assume that a variable’s purpose relates to optimization and therefore an OptimizationRemarkEmitter variable could be given the name remarkEmitter or even remarker.

The following is a list of longer class names and the associated shorter variable name.

Class name	Variable name
BasicBlock	block
ConstantExpr	expr
ExecutionEngine	engine
MachineOperand	operand
OptimizationRemarkEmitter	remarker
PreservedAnalyses	analyses
PreservedAnalysesChecker	checker
TargetLowering	lowering
TargetMachine	machine

Transition Options ¶

There are three main options for transitioning:

Keep the current coding standard
Laissez faire
Big bang

Keep the current coding standard ¶

Proponents of keeping the current coding standard (i.e. not transitioning at all) question whether the cost of transition outweighs the benefit [EmersonConcern] [ReamesConcern] [BradburyConcern]. The costs are that git blame will become less usable; and that merging the changes will be costly for downstream maintainers. See Big bang for potential mitigations.

Laissez faire ¶

The coding standard could allow both CamelCase and camelBack styles for variable names [LattnerTransition].

A code review to implement this is at https://reviews.llvm.org/D57896.

Advantages ¶

Very easy to implement initially.

Disadvantages ¶

Leads to inconsistency [BradburyConcern] [AminiInconsistent].

Inconsistency means it will be hard to know at a guess what name a variable will have [DasInconsistent] [CarruthInconsistent].

Some large-scale renaming may happen anyway, leading to its disadvantages without any mitigations.

Big bang ¶

With this approach, variables will be renamed by an automated script in a series of large commits.

The principle advantage of this approach is that it minimises the cost of inconsistency [BradburyTransition] [RobinsonTransition].

It goes against a policy of avoiding large-scale reformatting of existing code [GreeneDistinguish].

It has been suggested that LLD would be a good starter project for the renaming [Ueyama].

Keeping git blame usable ¶

git blame (or git annotate) permits quickly identifying the commit that changed a given line in a file. After renaming variables, many lines will show as being changed by that one commit, requiring a further invocation of git blame to identify prior, more interesting commits [GreeneGitBlame] [RicciAcronyms].

Mitigation: git-hyper-blame can ignore or “look through” a given set of commits. A .git-blame-ignore-revs file identifying the variable renaming commits could be added to the LLVM git repository root directory. It is being investigated whether similar functionality could be added to git blame itself.

Minimising cost of downstream merges ¶

There are many forks of LLVM with downstream changes. Merging a large-scale renaming change could be difficult for the fork maintainers.

Mitigation: A large-scale renaming would be automated. A fork maintainer can merge from the commit immediately before the renaming, then apply the renaming script to their own branch. They can then merge again from the renaming commit, resolving all conflicts by choosing their own version. This could be tested on the [SVE] fork.

Provisional Plan ¶

This is a provisional plan for the Big bang approach. It has not been agreed.

Investigate improving git blame. The extent to which it can be made to “look through” commits may impact how big a change can be made.
Write a script to expand acronyms.
Experiment and perform dry runs of the various refactoring options. Results can be published in forks of the LLVM Git repository.
Consider the evidence and agree on the new policy.
Agree & announce a date for the renaming of the starter project (LLD).
Update the policy page. This will explain the old and new rules and which projects each applies to.
Refactor the starter project in two commits:
1. Add or change the project’s .clang-tidy to reflect the agreed rules. (This is in a separate commit to enable the merging process described in Minimising cost of downstream merges). Also update the project list on the policy page.
2. Apply clang-tidy to the project’s files, with only the readability-identifier-naming rules enabled. clang-tidy will also reformat the affected lines according to the rules in .clang-format. It is anticipated that this will be a good dog-fooding opportunity for clang-tidy, and bugs should be fixed in the process, likely including:
Gather feedback and refine the process as appropriate.
Apply the process to the following projects, with a suitable delay between each (at least 4 weeks after the first change, at least 2 weeks subsequently) to allow gathering further feedback. This list should exclude projects that must adhere to an externally defined standard e.g. libcxx. The list is roughly in chronological order of renaming. Some items may not make sense to rename individually - it is expected that this list will change following experimentation:
- TableGen
- llvm/tools
- clang-tools-extra
- clang
- ARM backend
- AArch64 backend
- AMDGPU backend
- ARC backend
- AVR backend
- BPF backend
- Hexagon backend
- Lanai backend
- MIPS backend
- NVPTX backend
- PowerPC backend
- RISC-V backend
- Sparc backend
- SystemZ backend
- WebAssembly backend
- X86 backend
- XCore backend
- libLTO
- Debug Information
- Remainder of llvm
- compiler-rt
- libunwind
- openmp
- parallel-libs
- polly
- lldb
Remove the old variable name rule from the policy page.
Repeat many of the steps in the sequence, using a script to expand acronyms.