This document is the reference manual for the LLVM test suite. It documents the structure of the LLVM test suite, the tools needed to use it, and how to add and run tests.
In order to use the LLVM test suite, you will need all of the software required to build LLVM, plus the following:
Darwin (Mac OS X) developers can simplify the installation of Expect and tcl by using fink. fink install expect will install both. Alternatively, Darwinports users can use sudo port install expect to install Expect and tcl.
The tests are located in two separate CVS modules. The basic feature and regression tests are in the main "llvm" module under the directory llvm/test. A more comprehensive test suite that includes whole programs in C and C++ is in the llvm-test module. This module should be checked out to the llvm/projects directory. When you configure the llvm module, the llvm-test module will be automatically configured. Alternatively, you can configure the llvm-test module manually.
To run all of the simple tests in LLVM using DejaGNU, use the master Makefile in the llvm/test directory:
% gmake -C llvm/testor
% gmake check
To run only a subdirectory of tests in llvm/test using DejaGNU (ie. Regression/Transforms), just set the TESTSUITE variable to the path of the subdirectory (relative to llvm/test):
% gmake -C llvm/test TESTSUITE=Regression/Transforms
Note: If you are running the tests with objdir != subdir, you must have run the complete testsuite before you can specify a subdirectory.
To run the comprehensive test suite (tests that compile and execute whole programs), run the llvm-test tests:
% cd llvm/projects % cvs co llvm-test % cd llvm-test % ./configure --with-llvmsrc=$LLVM_SRC_ROOT --with-llvmobj=$LLVM_OBJ_ROOT % gmake
The LLVM test suite contains two major categories of tests: code fragments and whole programs. Code fragments are in the llvm module under the llvm/test directory. The whole programs test suite is in the llvm-test module under the main directory.
Code fragments are small pieces of code that test a specific feature of LLVM or trigger a specific bug in LLVM. They are usually written in LLVM assembly language, but can be written in other languages if the test targets a particular language front end.
Code fragments are not complete programs, and they are never executed to determine correct behavior.
These code fragment tests are located in the llvm/test/Features and llvm/test/Regression directories.
Whole Programs are pieces of code which can be compiled and linked into a stand-alone program that can be executed. These programs are generally written in high level languages such as C or C++, but sometimes they are written straight in LLVM assembly.
These programs are compiled and then executed using several different methods (native compiler, LLVM C backend, LLVM JIT, LLVM native code generation, etc). The output of these programs is compared to ensure that LLVM is compiling the program correctly.
In addition to compiling and executing programs, whole program tests serve as a way of benchmarking LLVM performance, both in terms of the efficiency of the programs generated as well as the speed with which LLVM compiles, optimizes, and generates code.
All "whole program" tests are located in the llvm-test CVS module.
Each type of test in the LLVM test suite has its own directory. The major subtrees of the test suite directory tree are as follows:
This directory contains sample codes that test various features of the LLVM language. These pieces of sample code are run through various assembler, disassembler, and optimizer passes.
This directory contains regression tests for LLVM. When a bug is found in LLVM, a regression test containing just enough code to reproduce the problem should be written and placed somewhere underneath this directory. In most cases, this will be a small piece of LLVM assembly language code, often distilled from an actual application or benchmark.
The llvm-test CVS module contains programs that can be compiled with LLVM and executed. These programs are compiled using the native compiler and various LLVM backends. The output from the program compiled with the native compiler is assumed correct; the results from the other programs are compared to the native program output and pass if they match.
In addition for testing correctness, the llvm-test directory also performs timing tests of various LLVM optimizations. It also records compilation times for the compilers and the JIT. This information can be used to compare the effectiveness of LLVM's optimizations and code generation.
The SingleSource directory contains test programs that are only a single source file in size. These are usually small benchmark programs or small programs that calculate a particular value. Several such programs are grouped together in each directory.
The MultiSource directory contains subdirectories which contain entire programs with multiple source files. Large benchmarks and whole applications go here.
The External directory contains Makefiles for building code that is external to (i.e., not distributed with) LLVM. The most prominent members of this directory are the SPEC 95 and SPEC 2000 benchmark suites. The presence and location of these external programs is configured by the llvm-test configure script.
The LLVM test suite is partially driven by DejaGNU and partially driven by GNU Make. Specifically, the Features and Regression tests are all driven by DejaGNU. The llvm-test module is currently driven by a set of Makefiles.
The DejaGNU structure is very simple, but does require some information to be set. This information is gathered via configure and is written to a file, site.exp in llvm/test. The llvm/test Makefile does this work for you.
In order for DejaGNU to work, each directory of tests must have a dg.exp file. This file is a program written in tcl that calls the llvm-runtests procedure on each test file. The llvm-runtests procedure is defined in llvm/test/lib/llvm-dg.exp. Any directory that contains only directories does not need the dg.exp file.
In order for a test to be run, it must contain information within the test file on how to run the test. These are called RUN lines. Run lines are specified in the comments of the test program using the keyword RUN followed by a colon, and lastly the commands to execute. These commands will be executed in a bash script, so any bash syntax is acceptable. You can specify as many RUN lines as necessary. Each RUN line translates to one line in the resulting bash script. Below is an example of legal RUN lines in a .ll file:
; RUN: llvm-as < %s | llvm-dis > %t1 ; RUN: llvm-dis < %s.bc-13 > %t2 ; RUN: diff %t1 %t2
There are a couple patterns within a RUN line that the llvm-runtest procedure looks for and replaces with the appropriate syntax:
There are also several scripts in the llvm/test/Scripts directory that you might find useful when writing RUN lines.
Lastly, you can easily mark a test that is expected to fail on a specific platform or with a specific version of llvmgcc by using the XFAIL keyword. Xfail lines are specified in the comments of the test program using XFAIL, followed by a colon, and one or more regular expressions (separated by a comma) that will match against the target triplet or llvmgcc version for the machine. You can use * to match all targets. You can specify the major or full version (i.e. 3.4) for llvmgcc. Here is an example of an XFAIL line:
; XFAIL: darwin,sun,llvmgcc4
As mentioned previously, the llvm-test module provides three types of tests: MultiSource, SingleSource, and External. Each tree is then subdivided into several categories, including applications, benchmarks, regression tests, code that is strange grammatically, etc. These organizations should be relatively self explanatory.
In addition to the regular "whole program" tests, the llvm-test module also provides a mechanism for compiling the programs in different ways. If the variable TEST is defined on the gmake command line, the test system will include a Makefile named TEST.<value of TEST variable>.Makefile. This Makefile can modify build rules to yield different results.
For example, the LLVM nightly tester uses TEST.nightly.Makefile to create the nightly test reports. To run the nightly tests, run gmake TEST=nightly.
There are several TEST Makefiles available in the tree. Some of them are designed for internal LLVM research and will not work outside of the LLVM research group. They may still be valuable, however, as a guide to writing your own TEST Makefile for any optimization or analysis passes that you develop with LLVM.
Note, when configuring the llvm-test module, you might want to specify the following configuration options:
First, all tests are executed within the LLVM object directory tree. They are not executed inside of the LLVM source tree. This is because the test suite creates temporary files during execution.
The master Makefile in llvm/test is capable of running only the DejaGNU driven tests. By default, it will run all of these tests.
To run only the DejaGNU driven tests, run gmake at the command line in llvm/test. To run a specific directory of tests, use the TESTSUITE variable.
For example, to run the Regression tests, type gmake TESTSUITE=Regression in llvm/tests.
Note that there are no Makefiles in llvm/test/Features and llvm/test/Regression. You must use DejaGNU from the llvm/test directory to run them.
To run the llvm-test suite, you need to use the following steps:
Note that the second and third steps only need to be done once. After you have the suite checked out and configured, you don't need to do it again (unless the test code or configure script changes).
To make a specialized test (use one of the
llvm-test/TEST.<type>.Makefiles), just run:
gmake TEST=<type> test
For example, you could run the
nightly tester tests using the following commands:
% cd llvm/projects/llvm-test % gmake TEST=nightly test
Regardless of which test you're running, the results are printed on standard output and standard error. You can redirect these results to a file if you choose.
Some tests are known to fail. Some are bugs that we have not fixed yet; others are features that we haven't added yet (or may never add). In DejaGNU, the result for such tests will be XFAIL (eXpected FAILure). In this way, you can tell the difference between an expected and unexpected failure.
The tests in llvm-test have no such feature at this time. If the test passes, only warnings and other miscellaneous output will be generated. If a test fails, a large <program> FAILED message will be displayed. This will help you separate benign warnings from actual test failures.
Assuming you can run llvm-test, (e.g. "gmake TEST=nightly report" should work), it is really easy to run optimizations or code generator components against every program in the tree, collecting statistics or running custom checks for correctness. At base, this is how the nightly tester works, it's just one example of a general framework.
Lets say that you have an LLVM optimization pass, and you want to see how many times it triggers. First thing you should do is add an LLVM statistic to your pass, which will tally counts of things you care about.
Following this, you can set up a test and a report that collects these and formats them for easy viewing. This consists of two files, an "llvm-test/TEST.XXX.Makefile" fragment (where XXX is the name of your test) and an "llvm-test/TEST.XXX.report" file that indicates how to format the output into a table. There are many example reports of various levels of sophistication included with llvm-test, and the framework is very general.
If you are interested in testing an optimization pass, check out the "libcalls" test as an example. It can be run like this:
% cd llvm/projects/llvm-test/MultiSource/Benchmarks # or some other level % make TEST=libcalls report
This will do a bunch of stuff, then eventually print a table like this:
Name | total | #exit | ... FreeBench/analyzer/analyzer | 51 | 6 | FreeBench/fourinarow/fourinarow | 1 | 1 | FreeBench/neural/neural | 19 | 9 | FreeBench/pifft/pifft | 5 | 3 | MallocBench/cfrac/cfrac | 1 | * | MallocBench/espresso/espresso | 52 | 12 | MallocBench/gs/gs | 4 | * | Prolangs-C/TimberWolfMC/timberwolfmc | 302 | * | Prolangs-C/agrep/agrep | 33 | 12 | Prolangs-C/allroots/allroots | * | * | Prolangs-C/assembler/assembler | 47 | * | Prolangs-C/bison/mybison | 74 | * | ...
This basically is grepping the -stats output and displaying it in a table. You can also use the "TEST=libcalls report.html" target to get the table in HTML form, similarly for report.csv and report.tex.
The source for this is in llvm-test/TEST.libcalls.*. The format is pretty simple: the Makefile indicates how to run the test (in this case, "opt -simplify-libcalls -stats"), and the report contains one line for each column of the output. The first value is the header for the column and the second is the regex to grep the output of the command for. There are lots of example reports that can do fancy stuff.
The LLVM Nightly Testers automatically check out an LLVM tree, build it, run the "nightly" program test (described above), run all of the feature and regression tests, and then delete the checked out tree. This tester is designed to ensure that programs don't break as well as keep track of LLVM's progress over time.
If you'd like to set up an instance of the nightly tester to run on your machine, take a look at the comments at the top of the utils/NightlyTest.pl file. We usually run it from a crontab entry that looks like this:
5 3 * * * $HOME/llvm/utils/NightlyTest.pl -parallel $CVSROOT \
$HOME/buildtest $HOME/cvs/testresults
Or, you can create a shell script to encapsulate the running of the script. The optimized x86 Linux nightly test is run from just such a script:
#!/bin/bash BASE=/proj/work/llvm/nightlytest export CVSROOT=:pserver:anon@llvm.org:/var/cvs/llvm export BUILDDIR=$BASE/build export WEBDIR=$BASE/testresults export LLVMGCCDIR=/proj/work/llvm/cfrontend/install export PATH=/proj/install/bin:$LLVMGCCDIR/bin:$PATH export LD_LIBRARY_PATH=/proj/install/lib cd $BASE cp /proj/work/llvm/llvm/utils/NightlyTest.pl . nice ./NightlyTest.pl -nice -release -verbose -parallel -enable-linscan \ -noexternals 2>&1 > output.log mail -s 'X86 nightly tester results' llvm-testresults@cs.uiuc.edu < output.log
Take a look at the NightlyTest.pl file to see what all of the flags and strings do. If you start running the nightly tests, please let us know and we'll link your page to the global tester page. Thanks!