llvmc - The LLVM Compiler Driver
llvmc [options] [filenames...]
The llvmc command is a configurable driver for invoking other
LLVM (and non-LLVM) tools in order to compile, optimize and link software
for multiple languages. For those familiar with the GNU Compiler
Collection's gcc tool, it is very similar. This tool has the
following main goals or purposes:
The tool itself does nothing with a user's program. It merely invokes other
tools to get the compilation tasks done.
The options supported by llvmc generalize the compilation process and
provide a consistent and simple interface for multiple programming languages.
This makes it easier for developers to get their software compiled with LLVM.
Without llvmc, developers would need to understand how to invoke the
front-end compiler, optimizer, assembler, and linker in order to compile their
programs. llvmc's sole mission is to trivialize that process.
llvmc always takes the following basic actions:
- Command line options and filenames are collected.
The command line options provide the marching orders to llvmc on what actions
it should perform. This is the request the user is making of llvmc and it
is interpreted first.
- Configuration files are read.
Based on the options and the suffixes of the filenames presented, a set of
configuration files are read to configure the actions llvmc will take.
Configuration files are provided by either LLVM or the front end compiler tools
that llvmc invokes. Users generally don't need to be concerned with the
contents of the configuration files.
- Determine actions to take.
The tool chain needed to complete the task is determined. This is the primary
work of llvmc. It breaks the request specified by the command line options
into a set of basic actions to be done:
- Execute actions.
The actions determined previously are executed sequentially and then
llvmc terminates.
Control options tell llvmc what to do at a high level. The
following control options are defined:
- -c or --compile
-
This option specifies that the linking phase is not to be run. All
previous phases, if applicable will run. This is generally how a given
bytecode file is compiled and optimized for a source language module.
- -k or --link or default
-
This option (or the lack of any control option) specifies that all stages
of compilation, optimization, and linking should be attempted. Source files
specified on the command line will be compiled and linked with objects and
libraries also specified.
- -S
-
This option specifies that compilation should end in the creation of
an LLVM assembly file that can be later converted to an LLVM object
file.
- -E
-
This option specifies that no compilation or linking should be
performed. Only pre-processing, if applicable to the language being
compiled, is performed. For languages that support it, this will
result in the output containing the raw input to the compiler.
Optimization with llvmc is based on goals and specified with
the following -O options. The specific details of which
optimizations run is controlled by the configuration files because
each source language will have different needs.
- -O1 or -O0 (default, fast compilation)
-
Only those optimizations that will hasten the compilation (mostly by reducing
the output) are applied. In general these are extremely fast and simple
optimizations that reduce emitted code size. The goal here is not to make the
resulting program fast but to make the compilation fast. If not specified,
this is the default level of optimization.
- -O2 (basic optimization)
-
This level of optimization specifies a balance between generating good code
that will execute reasonably quickly and not spending too much time optimizing
the code to get there. For example, this level of optimization may include
things like global common subexpression elimination, aggressive dead code
elimination, and scalar replication.
- -O3 (aggressive optimization)
-
This level of optimization aggressively optimizes each set of files compiled
together. However, no link-time inter-procedural optimization is performed.
This level implies all the optimizations of the -O1 and -O2 optimization
levels, and should also provide loop optimizations and compile time
inter-procedural optimizations. Essentially, this level tries to do as much
as it can with the input it is given but doesn't do any link time IPO.
- -O4 (link time optimization)
-
In addition to the previous three levels of optimization, this level of
optimization aggressively optimizes each program at link time. It employs
basic analysis and basic link-time inter-procedural optimizations,
considering the program as a whole.
- -O5 (aggressive link time optimization)
-
This is the same as -O4 except it employs aggressive analyses and
aggressive inter-procedural optimization.
- -O6 (profile guided optimization: not implemented)
-
This is the same as -O5 except that it employs profile-guided
re-optimization of the program after it has executed. Note that this implies
a single level of re-optimization based on runtime profile analysis. Once
the re-optimization has completed, the profiling instrumentation is
removed and final optimizations are employed.
- -O7 (lifelong optimization: not implemented)
-
This is the same as -O5 and similar to -O6 except that re-optimization
is performed through the life of the program. That is, each run will update
the profile by which future re-optimizations are directed.
- -l LIBRARY
-
This option instructs llvmc to locate a library named LIBRARY and search
it for unresolved symbols when linking the program.
- -L path
-
This option instructs llvmc to add path to the list of places in which
the linker will
- -x LANGUAGE
-
This option instructs llvmc to regard the following input files as
containing programs in the language LANGUAGE. Normally, input file languages
are identified by their suffix but this option will override that default
behavior. The -x option stays in effect until the end of the options or
a new -x option is encountered.
- -march
-
This option selects the back end code generator to use. The arch portion
of the option names the back end to use.
- --native
-
Normally, llvmc produces bytecode files at most stages of compilation.
With this option, llvmc will arrange for native object files to be
generated with the -c option, native assembly files to be generated
with the -S option, and native executables to be generated with the
--link option. In the case of the -E option, the output will not
differ as there is no native version of pre-processed output.
- -o filename
-
Specify the output file name. The contents of the file depend on other
options.
- -n or --no-op
-
This option tells llvmc to do everything but actually execute the
resulting tools. In combination with the -v option, this causes llvmc
to merely print out what it would have done.
- -v or --verbose
-
This option will cause llvmc to print out (on standard output) each of the
actions it takes to accomplish the objective. The output will immediately
precede the invocation of other tools.
- --stats
-
Print all statistics gathered during the compilation to the standard error.
Note that this option is merely passed through to the sub-tools to do with
as they please.
- --time-passes
-
Record the amount of time needed for each optimization pass and print it
to standard error. Like --stats this option is just passed through to
the sub-tools to do with as they please.
- --time-programs
-
Record the amount of time each program (compilation tool) takes and print
it to the standard error.
- -T,pre=options
-
Pass an arbitrary option to the pre-processor.
- -T,opt=options
-
Pass an arbitrary option to the optimizer.
- -T,lnk=options
-
Pass an arbitrary option to the linker.
- -T,asm=options
-
Pass an arbitrary option to the code generator.
- -Ipath
-
This option is just passed through to a C or C++ front end compiler to tell it
where include files can be found.
- -Dsymbol
-
This option is just passed through to a C or C++ front end compiler to tell it
to define a symbol.
- --help
-
Print a summary of command line options.
- --version
-
This option will cause llvmc to print out its version number and terminate.
You better know what you're doing if you use these options. Improper use
of these options can produce drastically wrong results.
- --config-dir dirname
-
This option tells llvmc to read configuration data from the directory
named dirname. Data from such directories will be read in the order
specified on the command line after all other standard configuration files have
been read. This allows users or groups of users to conveniently create
their own configuration directories in addition to the standard ones to which
they may not have write access.
The options below are not currently implemented in llvmc but will be
eventually. They are documented here as ``future design''.
- --show-config [suffixes...]
-
When this option is given, the only action taken by llvmc is to show its
final configuration state in the form of a configuration file. No compilation
tasks will be conducted when this option is given; processing will stop once
the configuration has been printed. The optional (comma separated) list of
suffixes controls what is printed. Without any suffixes, the configuration
for all languages is printed. With suffixes, only the languages pertaining
to those file suffixes will be printed. The configuration information is
printed after all command line options and configuration files have been
read and processed. This allows the user to verify that the correct
configuration data has been read by llvmc.
- --config :section:name=value
-
This option instructs llvmc to accept value as the value for configuration
item name in the section named section. This is a quick way to override
a configuration item on the command line without resorting to changing the
configuration files.
- --config-only-from dirname
-
This option tells llvmc to skip the normal processing of configuration
files and only configure from the contents of the dirname directory. Multiple
--config-only-from options may be given in which case the directories are
read in the order given on the command line.
- --emit-raw-code
-
No optimization is done whatsoever. The compilers invoked by llvmc with
this option given will be instructed to produce raw, unoptimized code. This
option is useful only to front end language developers and therefore does not
participate in the list of -O options. This is distinctly different from
the -O0 option (a synonym for -O1) because those optimizations will
reduce code size to make compilation faster. With --emit-raw-code, only
the full raw code produced by the compiler will be generated.
If llvmc succeeds, it will exit with 0. Otherwise, if an error
occurs, it will exit with a non-zero value and no compilation actions
will be taken. If one of the compilation tools returns a non-zero
status, pending actions will be discarded and llvmc will return the
same result code as the failing compilation tool.
gccas, gccld, llvm-as, llvm-dis,
llc, llvm-link
Maintained by the LLVM Team (http://llvm.cs.uiuc.edu).